The WNMX Milling inserts are suitable for the HRM Double High Feed Milling system. The inserts have 6 usable cutting edges. The hight positive inserts give an excellent price-performance ratio.
1. Apply helix cutting edge
2. Improved sharpness of principle edge
3. Improved toughness of corner edge
4. 11,13 double relief angle increase rigidity and prevent interference
| Category |
Milling |
| Sub Category |
Indexable Milling |
| Sub Category 2 |
HRMD Indexable Milling System |
| Designation |
WNMX06 |
| Radius |
1.2 |
| Insert Radius (mm) |
1.2 |
| Chipbreaker |
MM (General) |
| Grade |
PC3700 (Tough Steel) |
| d |
6.35 |
| t |
3.18 |
| d1 |
2.86 |
| f |
1.2 |
| Applicable Materials |
Steel |
| Insert Series |
WNMX |
| Brand |
Estool |
| Type |
Type |
| SDMT120512-JW |
BLMP0603R-M |
| SDMT150512-JW |
EPNW0603TN |
| SDMT09T320-VGM |
LNMU0202ZNER |
| SPMT120408-PM/KM |
LNMU0303ZER-MJ |
| SEMT1204AFTN-M |
LNPU110408SRGE |
| SOMT100420-GM |
LNTU15T608 |
| SOMT140520ER-GM |
LOGU030310ER-GM/MM |
| SNMX1205ANN-M |
JDMT070204/08 |
| PNMU090508ENER-GM |
LPGT010210ER-GM |
| HNMG0907ANSN-R |
ONHU060408-PM |
| WNMU080608EN-M |
ONHU080608-GM |
| WNMU060408EN-M |
ONMU090520ANTN-M13 |
| WNMU040308EN-M |
ONMU090510ANTN-MJ |
| XNEX080608/12TR-ME09 |
WNMX060312ZNN |
| BLMP0904R-M |
SNMX1206ANN-M |
| WNMX09T316ZNN |
4NKT060308R-M |
| MPHW060308L |
4NKT060310R-M |
| SEER1203AFTR |
YPHW100308R |
| SEER1504AFTR |
ENMU100412 |
| SPKT1205AFTR |
WDMW080520ZTR |
| JDMW140520SR |
JDMW120420ZDSR |
| SNMU1206ANEN-GM |
SEMT13T3AGSN-GM |
| Type |
Type |
| APMT1135PDER-H2 |
APKT11T308-PM |
| APMT1135PDER-M2 |
APKT150412-PM2 |
| APMT1135PDER-XR |
APKT1705PDER-EM |
| APMT160408PDER-H2 |
AXMT123508PEER-G |
| APMT160408PDER-M2 |
AXMT170508PEER-G |
| APMT1605PDER-XR |
R39011T308-VPM |
| RCMT1606MO |
R39011T304-VPM |
| RDKT1204 |
R390-180608M-KM |
| RPEW1003MO |
R390-180612M-PM |
| RPKT1204MO |
R390-170508M-PM |
| RPMT1204MO-MC |
RDKW1604MO |
| XOMX180608TR-M14 |
RDKW12T3MO |
| XOMX120408TR-M12 |
RDMW1003MO |
| XOMX10T308-M9 |
APKT100305/08 |
| XOMX060208R-MO5 |
APKT160408-PM |
| LDMT1504PDSR-EM |
JDMT150508R |
| BDMT11T316ER-JT |
BDMT11T308ER-JT |
| BDMT070304ER-JT |
|
Feedback
CVD Coating
| Grade |
Description |
Equivalent to ISO |
| YC1015 |
MT-CVD coated, the substrate with excellent wear resistance in combination with MT-TiCN,fine grained AL2O3TiN multi-layer coating, which is suitable for finishing of steel. |
P05-P15 |
| YC1025 |
MT-CVD coated, Cutting edge with good toughness in combination with TiCN+Al2O3(thick)+TiN multi-layer coating, which is suitable for semi-finishing of steel. |
P10~P25 |
| YC1035 |
MT-CVD coated, the substrate with excellent toughness and plastic deformation resistance in combination with TiCN+Al2O3(thick)+TiN multi-layer coating, which is suitable for roughness of steel. |
P20-P35 |
| YC1125 |
Special strength toughness of the insert substrates,perfect combinations with MT-TiCN,ultra fine AL2O3,coatings ,common grade for steel,suitable for steel,cast iron,stainess steel in semi-finishing,finishing |
P10~P25 |
| YC1325 |
With optimized toughness and hardness of the substrate and MT-TiN, fine grain Al2O3 and TiN coating and with a special post-treatment process, the formation of excellent performance of the double-color coating, suitable for steel, stainless steel and cast iron in semi-finishing and finishing |
P10~P25 |
| YC2105 |
MT-CVD coated, the super fine grain size substrate with excellent hardness in combination with Al2O3(extra thick) coating, the smooth surface, which is suitable for turning and milling of grey cast iron at high speed |
K05-K15 |
| YC2115 |
MT-CVD coated, the substrate with excellent hardness and stripping resistance in combination withAl2O3(thick) coating, the smooth surface of the tools, which is suitable for turning and milling of cast iron at middle and high speed. |
K10-K30 |
| YC2215 |
High wear-resistant substrate, new generation coating process with perfect combination of MTTI (CN), Super Al2O3, TiCN coating, initial grades of ductile cast iron, forged cast iron, high cutting speed allowance |
K10~K30 |
PVD Coating
| Grade |
Description |
Equivalent to ISO |
color |
| YP3025 |
2-4um TiALN PVDcoated,combinating with ultra fine particles'substrates with high-toughness, suitabe for all materials,stainless steel, steel, cast alloy in finishing,semi-finishing |
P10-P25/ K15-K30 |
Ash black |
| YP3225 |
2-4um AlCr + AlCrSiN PVD coating, combined with ultra-fine particle matrix, has high wear resistance, suitable for finishing and semi-finishing of heat-treated steel ,stainless steel and quenched steel |
P10-P25/ K15-K30/ M10-M25 |
bronze |
| YP3325 |
The latest AlCr + AlCrSi PVD coatings, combined with ultra-fine particle substrates, has high wear resistance and excellent performance in finishing and semi-finishing of stainless and hardened steel |
P10-P25/ K15-K30/ M10-M25 |
bronze |
| YP3825 |
Ultra-fine grain matrix,newly upgraded nano-composite coating withhigh heat resistance and high toughness.Suitable for general milling of cast iron, steel and stainless steel, with better wear resistance.Supplementary grade for stainless steel turning. |
P10-P25/ K15-K30/ M10-M25 |
bronze |
| YP3925 |
High-performance coating of the latest M, S and N materials with extremely high density and smooth surface. It has good performance for most occasions of M &S cutting |
M10-M25/ S |
silver |
| YP3330 |
2-4um TiALN +TiN PVDcoated,combinating with fine particles'substrates with high-toughness, suitabe for all materials,high-temperature alloy Ti alloy in semi-finishing,roughing |
P20-P35/ K20-K35 |
yellow |
| YR3325 |
The latest AlCr + AlCrSin PVD coatings, combined with unique rare metal substrates, offer high wear resistance and excellent performance in finishing and semi-finishing of superalloys and heat resistant alloys |
S10-S25 |
bronze |
| YR3025 |
Unique material matrix, with 2-4um TiAlN PVD coating, with high toughness and heat resistance, suitable for high temperature alloy, heat resistant alloy and other difficult to process materials finishing, semi-finishing |
S10-S25 |
Ash black |
Why Choose PVD Coating?
PVD coating creates a thin, hard layer on the surface of carbide inserts, increasing their hardness and reducing friction. This means less heat buildup, which can significantly extend tool life and improve performance in demanding machining applications.
The difference between YP3025 and YP3825
First of all, their coating composition is not the same, the application is also different, YP3025 is a general processing grade, he can be suitable for many materials processing, especially the steel material processing effect is good, YP3825 is a silicon coating, improve the hardness of inserts processing, In particular, the field of stainless steel and high-hard steel materials have a good performance
Advantages:
1.High-quality materials: This product uses tungsten carbide, a highly durable material suitable for heavy-duty applications, especially in machining steel, stainless steel and cast iron.
2.Versatile coating options: This product is available with all coating options, ensuring compatibility with various machine types and user preferences, meeting the needs of different customers.
3.Customization support: The manufacturer provides OEM, ODM and OBM customization support, allowing customers to customize products according to their specific requirements, including product name, packaging and branding.
4.Convenient packaging: The product is packaged in plastic boxes of 10 per box, which is convenient for storage and transportation, reducing handling costs.
5.Global shipping: The product can be shipped by air and express, ensuring timely and efficient delivery to customers around the world.
Audited Supplier 
){kind=link}