| Customization: | Available |
|---|---|
| Condition: | New |
| Customized: | as Your Requirements |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Deep hole drilling | |||
| Type | Type | Type | Type |
| TPMT220612TR-22/23 | ZSGT060204R | GP04 | 800-050308M-I-G/L |
| TPMT16T312R-22/23 | LOGT060204R | GP05 | 800-06T308M-I-G/L |
| R424.9-180608-22/23 | TOGT070304R | GP06 | 800-08T308M-I-G/L |
| R424.9-13T308-22/23 | TOGT080305R | GP07 | 800-10T308M-I-G/L |
| TXN160408-L | TOGT090305R | GP08 | 800-12T308M-I-G/L |
| TXN240508-L | TOGT100305R | GP10 | 800-050308M-C-G/L |
| TXN400708-A | TOGT110405R | GP12 | 800-06T308M-C-G/L |
| TPMX0902-RG | TOGT120405R | GP14 | 800-08T308M-C-G/L |
| TPMX1403-RG | TOGT130405R | GP18 | 800-10T308M-C-G/L |
| TPMX1704-RG | NPHTseries | 800-14D | 800-12T308M-C-G/L |
| TPMX2204RG | NPMTseries | 800-16D | 800-060308H-P-G/L |
| TPMX2405-RG | 800-06A | 800-18D | 800-08T308H-P-G/L |
| TPMX2807-RG | 800-07A | 800-20D | 800-09T308H-P-G/L |
| TPMX1403LG | 800-08A | 800-20D | 800-11T308H-P-G/L |
| TPMX1704LG | 800-10A | 800-22D | |
| TPMX2405LG | 800-12A | 800-24D | |
| 800-26D | |||
| Tool Diameter | Insert | Guide Pad | ||||
| Insert | Screw | Wrench | GP X 2pcs | Screw X 2pcs | Wrench | |
| 10.00-10.99 | ZSGT 060204 | SR-M2.5X0.35L3.8 | T-7/5 | GPS-04-16-045 | CSTB-2 | T-6/5 |
| 11.00-11.80 | GPS-04-16-050 | |||||
| 11.81-11.99 | LOGT 060204 | SR 10503833L040 (M4*0.5?) | ||||
| 12.00-13.99 | LOGT 060204 | SR 10503833L040 (M4*0.5?) | T-7F | GPS-04-16-055 | TS 20043I/HG-P M2X0.4 | IP-6/5 |
| 14.00-15.99 | TOGT 070304 | SR 14-560/S M2.5X0.45 | T-8/5 | GPS-05-18-060 | SR 34-508 M2.2X0.45 | T-7/5 |
| 16.00-18.00 | TOGT 080305 | T-8/5 | GPS-05-18-075 | |||
| 18.01-20.00 | TOGT 090305 | T-8/5 | GPS-06-20-085 | |||
| 20.01-21.00 | TOGT 100305 | SR 34-506 M3X0.5 | T-9/5 | GPS-06-20-085 | ||
| 21.01-21.99 | TOGT 100305 | GPS-06-20-100 | ||||
| 22.00-25.00 | TOGT 110405 | SR 14-571/S M3.5X0.6 | T-10/5 | GPS-06-20-100 | ||
| 25.01-28.00 | TOGT 120405 | SR 14-506 M4X0.7 | T-15/5 | GPS-06-20-120 | ||
| 28.01-29.99 | TOGT 130408 | SR 16-212/L10 M5X0.8 | T20/5 | GPS-06-20-120 | SR 34-508 M2.2X0.45 | T-7/5 |
| 30.00-32.00 | TOGT 130408 | GPS-07-20-120 | CSTB-3L065 M2.2X0.45 | T-9/5 | ||
| 32.01-39.00 | TOGT 140510 | GPS-07-20-120 | ||||
| 39.01-40.00 | TOGT 140510 | GPS-08-25-155 | ||||
| Item No. | L(mm) | IC(mm) | S(mm) | R |
| ZSGT060204R | / | / | 1.94 | 0.4 |
| LOGT060204R | 9.68 | 7 | 2.34 | 0.4 |
| TOGT070304R | 8.58 | 7.69 | 2.73 | 0.4 |
| TOGT080305R | 9.58 | 8.32 | 3.42 | 0.5 |
| TOGT090305R | 10.46 | 8.55 | 3.44 | 0.5 |
| TOGT100305R | 11.45 | 9.23 | 3.66 | 0.5 |
| TOGT110405R | 12.8 | 10.4 | 4.4 | 0.5 |
| TOGT120405R | 14.22 | 11.59 | 4.72 | 0.5 |
| TOGT130408R | 16.66 | 12.85 | 5.2 | 0.8 |
| Guide Pad | L(mm) | W(mm) | S(mm) | R | d |
| GPS-04-055 | 16 | 4 | 2.0 | 5.5 | 2.28 |
| GPS-05-060 | 18 | 5 | 2.5 | 6 | 2.8 |
| GPS-05-075 | 18 | 5 | 2.5 | 7.5 | 2.8 |
| GPS-06-075 | 20 | 6 | 3.0 | 7.5 | 2.8 |
| GPS-06-085 | 20 | 6 | 3.0 | 8.5 | 2.8 |
| GPS-06-100 | 20 | 6 | 3.0 | 10 | 2.8 |
| GPS-06-120 | 20 | 6 | 3.0 | 12 | 2.8 |
| GPS-07-120 | 20 | 7 | 3.5 | 12 | 3.4 |
| GPS-08-155 | 25 | 8 | 4.5 | 15.5 | 3.4 |
| GPS-10-200 | 30 | 10 | 4.5 | 20 | 4.24 |
| GPS-12-250 | 35 | 12 | 5.5 | 25 | 4.24 |
| GPS-14-250 | 40 | 14 | 7.5 | 25 | 5.5 |
| GPS-18-300 | 40 | 18 | 9 | 30 | 6.7 |
| Grade | Description | Equivalent to ISO |
| YC1015 | MT-CVD coated, the substrate with excellent wear resistance in combination with MT-TiCN,fine grained AL2O3TiN multi-layer coating, which is suitable for finishing of steel. | P05-P15 |
| YC1025 | MT-CVD coated, Cutting edge with good toughness in combination with TiCN+Al2O3(thick)+TiN multi-layer coating, which is suitable for semi-finishing of steel. | P10~P25 |
| YC1035 | MT-CVD coated, the substrate with excellent toughness and plastic deformation resistance in combination with TiCN+Al2O3(thick)+TiN multi-layer coating, which is suitable for roughness of steel. | P20-P35 |
| YC1125 | Special strength toughness of the insert substrates,perfect combinations with MT-TiCN,ultra fine AL2O3,coatings ,common grade for steel,suitable for steel,cast iron,stainess steel in semi-finishing,finishing | P10~P25 |
| YC1325 | With optimized toughness and hardness of the substrate and MT-TiN, fine grain Al2O3 and TiN coating and with a special post-treatment process, the formation of excellent performance of the double-color coating, suitable for steel, stainless steel and cast iron in semi-finishing and finishing | P10~P25 |
| YC2105 | MT-CVD coated, the super fine grain size substrate with excellent hardness in combination with Al2O3(extra thick) coating, the smooth surface, which is suitable for turning and milling of grey cast iron at high speed | K05-K15 |
| YC2115 | MT-CVD coated, the substrate with excellent hardness and stripping resistance in combination withAl2O3(thick) coating, the smooth surface of the tools, which is suitable for turning and milling of cast iron at middle and high speed. | K10-K30 |
| YC2215 | High wear-resistant substrate, new generation coating process with perfect combination of MTTI (CN), Super Al2O3, TiCN coating, initial grades of ductile cast iron, forged cast iron, high cutting speed allowance | K10~K30 |
| Grade | Description | Equivalent to ISO |
| YP3025 | 2-4um TiALN PVDcoated,combinating with ultra fine particles'substrates with high-toughness, suitabe for all materials,stainless steel, steel, cast alloy in finishing,semi-finishing | P10-P25 K15-K30 |
| YP3225 | 2-4um AlCr + AlCrSiN PVD coating, combined with ultra-fine particle matrix, has high wear resistance, suitable for finishing and semi-finishing of heat-treated steel ,stainless steel and quenched steel | P10-P25 K15-K30 M10-M25 |
| YP3325 | The latest AlCr + AlCrSin PVD coatings, combined with ultra-fine particle substrates, has high wear resistance and excellent performance in finishing and semi-finishing of stainless and hardened steel | P10-P25 K15-K30 M10-M25 |
| YP3925 | High-performance coating of the latest M, S and N materials with extremely high density and smooth surface. It has good performance for most occasions of M &S cutting | M10-M25 |
| YP3330 | 2-4um TiALN +TiN PVDcoated,combinating with fine particles'substrates with high-toughness, suitabe for all materials,high-temperature alloy Ti alloy in semi-finishing,roughing | P20-P35 K20-K35 |
| YR3325 | The latest AlCr + AlCrSin PVD coatings, combined with unique rare metal substrates, offer high wear resistance and excellent performance in finishing and semi-finishing of superalloys and heat resistant alloys | S10-S25 |
| YR3025 | Unique material matrix, with 2-4um TiAlN PVD coating, with high toughness and heat resistance, suitable for high temperature alloy, heat resistant alloy and other difficult to process materials finishing, semi-finishing | S10-S25 |
){kind=link}